If you’re like most homeowners, your garage is one of the most used areas in your home. And if you have a garage door opener, it’s probably one of the most important pieces of equipment you own. Garage Experts is one of the most popular garage door openers on the market today. So if something goes wrong with it, you need to know how to fix it yourself. Here are some simple repairs you can do if you’re experiencing Garaga Experts door opener problems.
The opener Doesn’t Close and Lights are Flashing
If your Garaga Experts door opener doesn’t close and the lights are flashing, the photo eyes might be out of alignment.
To fix this, first, check to make sure there is nothing blocking the path of the photo eyes. Then, align the photo eyes so that they’re pointing directly at each other.
If you notice your garage door flashing and your opener still doesn’t work, it could be because the safety sensors are dirty. To clean it, you can wipe it down with a damp cloth.
Door Control Not Working
If your garage expert door control is not working, it could be because the batteries are dead. To fix this, replace the batteries in your door control.
If your opener still doesn’t work, it could be because the wires are loose. To fix this, check the wires leading to your door control and make sure they’re all connected securely.
If your opener still doesn’t work, it could be because the door control is faulty. To fix this, replace the door control with a new one.
Door Doesn’t Move
If your Garaga Experts door opener won’t open or move, it could be because the chain is off. To fix this, first, check to make sure the power is on.
Then, press the reset button on the opener. Finally, pull the cord to release the tension on the chain.
If your door still doesn’t move, it could be because the chain is broken. To fix this, replace the chain with a new one.
Door Moves, Stops, and Reverses
If your door moves and then stops and reverses, it could be because the limit switch is set too high.
To fix this, first, check the owner’s manual for your opener to find the correct setting.
Then, adjust the limit switch accordingly.
If your door still stops and reverses, it could be because the travel limits are set too low.
To fix this, first, check the owner’s manual for your opener to find the correct setting.
Then, adjust the travel limits accordingly. Additionally, it could be because the force settings are set too high.
To fix this, first, check the owner’s manual for your opener to find the correct setting. Then, adjust the force settings accordingly.
Door Opener Makes Humming Noise
If your opener is making a humming noise, it could be due to a dirty flywheel.
To clean the flywheel, disconnect the power to your opener and then remove the cover
. Clean the flywheel with a damp cloth, then reconnect the power and replace the cover.
If your opener is still making a humming noise, it could be because the motor is defective. To fix this, you will need to replace the motor.
Unable to Set or Keep Settings
If you’re unable to set or keep your opener’s settings, it could be because the circuit board is defective.
Replace the circuit board in order to solve this issue. If replacing the circuit board doesn’t help, it could be because the antenna is not positioned correctly.
To fix this, first, check the owner’s manual for your opener to find the correct position for the antenna. Then, reposition the antenna accordingly.
Battery Status is Flashing
If the battery status on your opener is flashing, the batteries may be low. To fix this, replace the batteries in your opener.
If replacing the batteries doesn’t fix the problem, it could be because the battery charger is defective. To fix this, you will need to replace the battery charger.
Door Stops and Reverses For No Reason
If your door stops and reverses for no reason, it could be because the safety sensors are dirty.
To clean the safety sensors, wipe them down with a damp cloth. If cleaning the safety sensors doesn’t fix the problem, it could be because they’re not properly aligned.
To fix this, first, check to make sure that there is nothing blocking the sensors. Then, press the reset button on the opener. Finally, realign the sensors so they’re pointing directly at each other.
Contact Us
If you’re having trouble with your garage door opener, there are a few things you can try to fix the issues yourself. But if the problem persists, our team at Fix It Right Garage Doors can help. With professional service, competitive pricing, and years of experience supporting clients across the GTA, we’re ready to handle any issues you’re experiencing with your garage door opener.
Contact us today to learn more about our services or to request a quote!
